![](/../../upload/image/20240322/6384672574265606916590247.jpg)
![](/../../upload/image/20240322/6384672574278412369318725.jpg)
Realize the three functions of cleaningg,welding and cutting at the same time
uses the power of your
laser for pre and post weld cleaning.
● The operation is simple,the head can be replaced in 15s, and the novice
can get started in a few hours
● System supports multiple languages
● Novice welders complete training and welding in hours, reducing training
and production costs
![](/../../upload/image/20240322/6384672574288373314519786.jpg)
360 degree without dead angle micro soldering
After the laser beam is focused, a small spot can be obtained, which can be accurately positioned
and used in the group welding of micro and small size workpieces for mass production. Mainly for
the welding of thin-walled materials and precision parts, it can realize spot welding, butt welding,
stack welding, sealing welding, etc., high aspect ratio, small weld width, small heat
![](/../../upload/image/20240322/6384672574290911863047204.jpg)
![](/../../upload/image/20240322/6384672574303914809004928.jpg)
![](/../../upload/image/20240322/6384672574307626631761590.jpg)
![](/../../upload/image/20240322/6384672574316920652733406.jpg)
![](/../../upload/image/20240322/6384672574335778504677038.jpg)
![](/../../upload/image/20240322/6384672577022303743070662.jpg)
![](/../../upload/image/20240322/6384672577032655982569895.jpg)
comparative project | Traditional welding | Fiber laser welding | new generation laser welding |
weld heat input | very high | low
| low |
work piece deformation | big | small | small |
Bonding strength with base metal | general | good | very good |
Subsequent processing | polish | no or few polish | polish |
welding speed | general | 2 times as traditional welding | More than 2 times as traditional welding |
Applicable material | Stainless steel. Carbon steel. Galvanized sheet | Stainless steel. Carbon steel. Galvanized sheet | Stainless steel. Carbon steel. Galvanized sheet |
consumptive material | more | less | less |
operation difficulty | complicated | General | simple |
Safety of the operator | unsafe | safe | safe |
impact of environmental protection | Not environmentally friendly | environmentally friendly | environmentally friendly |
Welding fault tolerance | good | bad | good |
Swing welding | no | no | yes |
Light spot width adjustable | no | no | yes |
Welding quality | inferior | general | good |
|
|
|
|
|
|
|
|
|
|
|
|
![](/../../upload/image/20240322/6384672577035890059028386.jpg)
![](/../../upload/image/20240322/6384672577042921216770956.jpg)
![](/../../upload/image/20240322/6384672577051515514513527.jpg)
![](/../../upload/image/20240322/6384672577062005224012760.jpg)