Laser marking machine daily maintenance
1, after the purchase of the machine, the computer as far as possible only marking work, do not connect to the Internet to download too much software, otherwise it will lead to a slow computer card, copy pictures or vector images as far as possible with U disk copy.
2. When the machine does not work, the marking machine and the computer power supply should be cut off.
3. When the machine is not working, cover the lens of the field mirror to prevent dust from contaminating the optical lens.
4. When the machine is working, the circuit is in a high voltage state, non-professionals, do not repair when starting, so as to avoid electric shock accidents.
5, any failure of the machine should immediately cut off the power supply.
6, the equipment is used for a long time, the dust in the air will be adsorbed on the surface of the lower end of the focusing mirror, and the light will reduce the power of the laser and affect the marking effect; Heavy causes the optical lens to absorb too much heat and burst. When the marking effect is not good, it should be carefully checked whether the surface of the focusing mirror is contaminated.
7. If the surface of the focusing mirror is contaminated, remove the focusing mirror and clean its lower surface.
8, remove the focusing mirror should be particularly careful, pay attention not to damage or fall injury; At the same time, do not touch the mirror surface with your hands or other objects
9, the cleaning method is to mix anhydrous ethanol (analytical pure) and ether (analytical pure) according to the ratio of 3:1, with a long fiber cotton swab or lens paper into the mixture, gently scrub the surface of the lower end of the focusing mirror, each wipe test side, must replace the cotton swab or lens paper.
10. During the working process of the marking machine, the marking machine shall not be moved to avoid damage to the machine.
11. Do not cover the pile or put other items on the marking machine, so as not to affect the heat dissipation effect of the machine
12, usually industrial electricity for a long time, the computer will have static electricity, the computer can be removed after a period of time to wipe clean, and then press on the use.